How to Get the Right Strap Size for your Apple Watch in 4 Steps

It can be confusing to know which watch band to shop for your Apple Watch, especially online when you cannot check the item before paying for it. Here are 4 things you should check before placing an order.

1. Find the Case Size of Your Apple Watch

Find the case size of your Apple Watch from the back of your Watch.

 

2. Find Straps that Fit Your Apple Watch

Shop for straps and bands that works with your Apple Watch. The Case Size for the watch bands should be the exact same as that engraved on your Apple Watch.
If a wrong size is chosen, the strap will not match your Apple Watch, and the connectors will be either too big or too small for your watch, just like the image below.

 

3. Check Your Wrist Size

Check that the length of the Apple Watch strap fit your wrist. All of our watchstraps are length adjustable (One Size Fit Most), but their shortest/ longest length differs. You can use a soft ruler to measure your wrist length, or use a non-elastic cloth/ piece of paper to get your wrist circumference, then measure its length. You can find individual wrist fit in the Product Details.

 

4. Adjusting Watch Strap Length

Most of our watchstraps are length-adjustable without any tools, and in case a special tool is needed, it will be included in your package for free.The following tutorial covers the adjustment methods of three of our most popular lock types:

Removable jewellery clasp

  1. Lift the latch on the top side of the jewellery clasp with your fingers to unsnap it.
  2. Remove extra clasps to shorten the watchstrap length.
  3. To relink the watchstrap, simply close and push the latch hook to snap the clasp shut.

The video tutorial is posted on our Instagram Highlight (@lemonstraps). Please visit Tutorial 2.1 here.

 

These watchstraps are considered jewellery/accessories, and can be worn loosely on your wrist. Perfect fit is not guaranteed.

 

Hook Lock

  1. Insert the mini screw driver into the hole where the arrow mark points to. Press the strap firmly onto a table, then push down the screw driver to open the clasp.
  2. Slide the clasp to adjust the length of your watchstrap.
  3. Insert the mini screw driver into the same hole. Push it towards the opposite side to relock the clasp.

 

These watchstraps are infinity adjustable for a perfect fit.

 

Folding clasp

  1. Observe the holes on both sides of the watchstrap. Point the adjustment tool pin into the holes that are deeper and do not have any straight line markings.
  2. Make sure the watchstrap is laid flat on the adjustment tool platform.
  3. Rotate the tool’s knob to push the needle inside the strap out.
  4. Remove excess pieces as needed.
  5. Relink the watchstrap by putting back the needle and pushing it in from the side it came out of with the adjustment tool.
    (*In case the adjustment tool pin is broken because of excessive force, please replace it with the back-up one attached at the back of the tool.)

The video tutorial is posted on our Instagram Highlight (@lemonstraps). Please visit Tutorial 2.2 here.

 

These watchstraps come with small link pieces for comfortable fit.

 

Here are some straps that come with removable jewellery clasps.

SHOP NOW
  • heart-34-34-34 - Lemon Straps

    100% Satisfaction Guarantee

    LEMON STRAPS offers "30-day Return or Exchange" and "12-month Product Warranty" to all product purchased.

    Learn more >